Hand Crafted Incandescent Light

PINCH SEAL MACHINE part 2

Second stage of a building started at the moment in which I decided to discard wire guide and aligh sections of the machine for a better idea of connecting all those parts to one block.
  • Year: 2014-2015
  • Project: Glass metal seal tool

Main body milling two openings in a block of aluminium
Main body - milling two openings in a block of aluminium
Main body and two aluminium flat bars
Openings are fitted to size of two flat bars
Opening was machined in the main body
Opening was machined in the main body
Milling a wire window
Milling a wire window
Main body with two side holes and wire windows
Main body with two side holes and wire windows at the top and bottom section
shaft supports
4 shaft supports
Shaft supports attached to the main body
Shaft supports attached to the main body
Spring with stopper and tension shaft
Spring with stopper and tension shaft
Forming plates and long shafts
In parralel I have machined all other parts - forming plates (flat bars) and long shafts
Shaft is attached to plate with two screws
Shaft is attached to a plate with two screws
Forming plates, shafts spring assembly are attached together
All together - forming plates, shafts, spring assembly
Machining forming plates
Machining forming plates to make them parralel when they are in closed position
Glass stamping plates
Glass stamping plates
Glass forming and wire positioning part is ready
Glass forming and wire positioning part is ready, now I need to make some changes to the machine to fit this device in

Next project - "PINCH SEAL MACHINE P.3"